Introduction to LW Series Horizontal Spiral Discharge Settlement Centrifuge
Published:
2018-02-26 22:30
Source:
LW series horizontal spiral discharge sedimentation centrifuges use the principle of centrifugal sedimentation to separate drilling suspension. The blades on the spiral feeder are pushed to the slag discharge port at the small end of the drum to discharge, and the liquid phase overflows through the overflow hole at the large end of the drum. This continuous circulation achieves the goal of continuous separation
The function of LW series horizontal spiral sedimentation centrifuge:
This centrifuge is mainly used to recover barite, remove fine solids, reduce the solid content of drilling fluid, control the density and viscosity of drilling fluid, ensure the performance of drilling fluid, and play an important role in rapid drilling
Advantages of LW Series Horizontal Spiral Settlement Centrifuge:
1. The sand removal effect is good when treating sludge water in the sand field. Based on years of experience in developing and producing centrifuges, and through a large number of field tests, we have optimized the parameters of the settling zone and the feeding method of the LW series centrifuges, greatly enhancing the desanding effect of the centrifuges, which can be completely comparable to imported centrifuges of the same specification
2. Low energy consumption and light workload. When the processing capacity is doubled, the power does not increase, and the working load of the motor does not exceed 80% of the rated power when the centrifuge is fully loaded
3. Reliable operation and long service life. The key component of the centrifuge, the screw propeller, is manufactured with precision work from thickened steel plates. The thickness of the surface wear-resistant layer is twice as thick as the original, ensuring the centrifuge's ultra-long service life. The main bearing adopts imported high-quality bearings, and the differential adopts high-precision hard tooth surface gear transmission. These measures enable our company's centrifuge to adapt to the harsh working conditions on the drilling site
4. Low vibration and noise. By improving the machining accuracy and dynamic balance accuracy of the rotating part of the centrifuge, the vibration and noise of the centrifuge have been reduced to a very low level
Jinhua Zhengbang Machinery Manufacturing Co., Ltd
Continuous innovation, customer first, integrity first
Contact information
Address: No.1189 Meihe Road, Qiubin Industrial City, Jinhua City, Zhejiang Province
Quick navigation
Follow us
Copyright: Jinhua Zhengbang Machinery Manufacturing Co., Ltd
Some of the images and text on this website are from the internet, and the copyright belongs to the original author or company. If there is any infringement, please contact us